THIS-8600 Structural Adhesives

THIS-8603 Pipeline Thread Sealant

green
High strength, low viscosity, insensitive to oil surface.
Used for slight oil surface and inert surface. Corrosion resistant.
Prevent fretting and corrsion of metal assemblies.
Retaining parts , which radial gap is low 0.13mm.
Typical application:Assemble bearing,bushing, small electric motor rotor shaft, bushes etc. Quickly salvage fretting (worn) hole/shaft assemblies.

THIS-8620 Pipeline Thread Sealants

green
Withstands temperature up to 232 ℃ high strength, high viscosity, no flowing.
Retaining parts,which radial gap is 0.05-0.1mm.
Prevent fretting and worn of metal, corrosion resistant, Sealing and Preventing leakage.
Retaining valve sleeves, keyways, and cylindrical liners of high temperature duty.

THIS-8660 Pipeline Thread Sealants

Grey
Use for repairing. Filling large gap. Fast curing.
High strength, high viscosity, no flowing.Use for retaining 0.1-0.5mm radial gap. Corrosion resistant.
Salvage worn heavily hole/shaft joints.
Salvage worn heavily bearing, bushings. Retaining pulley, bearing. Salvage shaft, key, keyway, bearing , bush etc.

THIS-8609 Pipeline Thread Sealants

green
General purpose.High strength, Low viscosity.
Suit for Interference and clearance fits. The radial fill gap is low 0.13mm, which can achieve highest shear strength. Corrosion resistant.
Augment press fit strength, salvage worn hole/shaft joints.
Retaining key and shaft, bearing, small eletrical motor rotor ,and bushes. Quickly salvage frettin (worn) hole/shaft joints.
Typical application:Assemble bearing,bushing, small electric motor rotor shaft, bushes etc. Quickly salvage fretting (worn) hole/shaft assemblies.

THIS-8648 Pipeline Thread Sealants

green
Withstand high temperature up to 175℃,high strength, medium to low viscosity.Fixture in 5 minutes, corrosion resistant.
Use at constantly working temperature up to 175℃.
Use for the clearance fit of low 0.15mm radial gap .
Retaining hole/shaft joints.

THIS-8680 Pipeline Thread Sealants

Grey
Use for repairing. Filling large gap. Fast curing.
High strength, high viscosity, no flowing.Use for retaining 0.1-0.5mm radial gap. Corrosion resistant.
Salvage worn heavily hole/shaft joints.
Salvage worn heavily bearing, bushings. Retaining pulley, bearing. Salvage shaft, key, keyway, bearing , bush etc.

Metal Chemcals